HP Laptop BIOS KeyQuickly answering, HP Laptop BIOS key is F10.

Accessing your laptop’s BIOS is extremely easy. It is sometimes very useful when you are required to perform some basic tasks like changing boot settings, boor from a specific source, etc. through this informative article we would take you into the BIOS of an HP laptop.

What is HP Boot Menu?

Booting is referred to as starting up your laptop, desktop PC, or any other computing device. The boot can be initiated either by pressing the power button of the device or executing certain commands using boot-up tools. In simple words, Booting is the process of getting your device ready for use. The device could be your PC, laptop, etc.

Find out which laptop is best for college students? here!

Getting into HP Laptop BIOS

Getting into the BIOS – a basic input-output system is the set of processes that controls communications between all input and output devices of a computer machine when it is turned ON.  BIOS is the first program that is executed by the laptop/computer.

To access the HP BIOS Setup utility you need to press a series of Keys;

  1. First, turn OFF your computer and wait for at least 5 seconds
  2. Now, turn the computer ON by pressing the power button and then immediately press the Esc key continually till the opening of the startup menu
  3. Here you need to press F10 Key (function key F10) on your keyboard and the BIOS utility will be open

An important thing the must be mentioned here is that the mentioned HP laptop BIOS key (Esc and then F10) is universal that is used for all HP products. But few limited editions of laptops like HP Pavilion the key Esc and F9 is also used.

HP laptop Startup Menu

The boot options that will be available on the HP laptop along with the corresponding keys are mentioned as follows:

  • F1 System Information
  • F2 System Diagnostics
  • F9 Boot Device options
  • F10 BIOS Setup
  • F11 System Recovery
  • F12 Network Boot

System information (F1 Key):

The option will make your available all information about your Computer including computer manufactures, name of products, Model/make, SKU No, BIOS version, Serial No, BIOS Date, etc. The information also includes processor type, memory capacity, and processing speed.

System Diagnostic (F2 Key);

The selection includes a series of system tests that are used to check system input and output hardware components’ failure. The system diagnostic test will automatically run every time when your power on your HP laptop. It’s the first test that executes beside BIOS. HP system diagnostics is useful to test system hardware components even when the operating system is not accessible.

Boot Device Options (F9):

This option provides a window Boot option or option to load the Operating system from different sources in other words. Here the HP has two different segments;

  • UEFI Boot Source
  • Legacy Boot Source

The UEFI (unified extensible firmware interface) booting will use the boot source of the installed window on your machine or network card for an online source. However, the legacy boot source will use external sources like flash drives, USB, or DVD drives.

BIOS Setup (F10 Key):

F10 or BIOS Setup is purely the BIOS setup utility that further has 5 tabs. This option is for changing the PC BIOS setting. The five sub-options available under BIOS are as below;

File: To review and update system information including date, time, etc.

Storage: To check storage devices configured on your computer and their association with the booting options.

Security: review the system IDs and set the passwords to add a security tier.

Power:  configuration of power management is linked in this segment, it also checks the power malfunctioning component of the system.

Advance: To control different computer behaviors such as Num Lock and many other device options.

System Recovery (F11 Key):

A system recovery imagery is maintained by the system itself if the option is enabled. You can reset your system to the factory default setting using system recovery. Resetting the system to its factory setting sometimes resolves the issue related to an inaccessible booting devices.

Network Boot (F12):

Using the F12 key you can directly boot your devices using your network drive.

Conclusion

Hopefully, the mentioned information regarding the HP laptop BIOS key has solved your problem, and definitely you will be able to access your HP laptop booting options. It is pertinent again to mention here that the F10 HP laptop’s BIOS key.

LEAVE A REPLY

Please enter your comment!
Please enter your name here